Air Slide Pneumatic Conveyor Systems consist of Air feed unit like blower, metallic bellow or compressor
which are the sources of air stream supply; product feed pneumatic
conveyor comprising two pressurized chambers or channels,
positioned one upon another at their open trough ends with the Air
Slide Fabric separating them. The pressurized air is fed into the
bottom chamber and permeates through the fabric entering the top
chamber where it picks up the product being feed into it at the
upper gradient end transports it to the collection point at the
lower gradient end.
There is an air separation arrangement at collection point or
filter unit, which separates the solid powder product stream from
the air stream. This may be a cyclone separator, bag house filter
or precipitator and material product is collected in bin, silo, or
hopper either for storage or mixing or blending or if in a finished
product stage to the packing plant.
· Air Slide Fabrics produced from 100% Polyester (spun/filament),
100% cotton, 100% Nomex® in widths of 200mm up to 2000mm and
thickness in 3.0, 4.0/4.5, 4.8 /5.0, 6.0/6.5/8.0/10/12mm.
· Available in roll lengths and cut pieces to actual installation
size & shape.
· Materials inspected & tested with Test & Guarantee
· Air Slide Fabrics for all Pneumatic gravity Conveyor System i.e.
Air Slide, Fluidor, Fluxo-Channel Fluid Slide, Aeration – Box,
Airlift or Aerpole pumps in Sillo, Bin & Hopper.
· For bulk material conveying fine crushed and ground powdered
chemical mineral substances used to manufacture cement as well as
any other similar powdered products.
· Our “Air Slide Fabrics” have good abrasion resistance offered in
100% Synthetic qualities of polyester to withstand organic and
inorganic chemicals, acids, alkalis and oxidizing agents contained
in raw mix, clinker and cement.
Austin Industries provide Air slide belt for conveying bulk
material by air gravity. The main use of Air slide belt is
discharging, declining transportation or homogenizing the powder or
small granular material in quiescent condition. Our airslide belt
is named as Air slide fabric, Air slide membrane, Air slide cloth,
Air slide canvas, Air permeable fabric, and Fluidization cloth,
fluidising fabric, etc by our customer. We adopt 100% polyester for
air slide fabric material.
Our fabrics can be used at temperatures between -60°C and +150°C.
The air slide fabrics are made from polyester yarns. We are also,
however, able to weave fabrics to our customers' specific demands
for air permeability and mechanical strength.
In cement plant:
An Air slide belt is in the middle of a chute. Powder material will
come into the chute above Airslide belt. Material will flow to the
chute lower side as pneumatic blower down Air slide belt. That's
why we say Airslide belt can move powder material because of the
wind power. And then, the rest wind will go out from the top of the
chute. Through the moving, no parts moved except powder material.
So that it can spare more energy and maintain cost, etc.
Our Air slide canvas is installed on the surface of the silo
bottom. It is supplied for installation as aeration units on the
sloped conical bottoms of bins and silos to aid in the withdrawal
of dry relatively free-flowing material.
Each Air slide aeration unit package consists of 200mm open-type.
Airslide conveyor units in lengths of 1.5 or 3m depend on the slope
length of the conical storage area. Some spoke patterns are
normally used with materials which have good fluidization
characteristics. Others spoke patterns provide maximum aeration for
difficult materials which can be fluidized.